PCB Manufacturing Services
Eight board types under one process envelope — 2 to 32 layers, 0.075 mm trace and space, 12 oz copper, and a CAM review that comes back inside 24 hours.

One envelope, eight board types.
PCB manufacturing covers a wide spread of work. A four-layer control board and a sixteen-layer rigid-flex assembly share a plating line but almost none of their stack-up decisions, and the process that suits one will ruin the other. This page is the map: what we build, how the eight board types differ, and which limits hold across all of them.
Most manufacturers list every board type they can attempt. We separate the eight that run as standard production from the work that needs an engineering query first, so a quote does not become the moment you discover a limit. That separation is the whole point of the list below.
Eight constructions, and what separates them.

Multilayer PCB
2–32 layers, controlled impedance, inner-layer AOI gating every lamination.

HDI PCB
Any-layer microvia, 0.1 mm laser drills, up to four lamination cycles.

Rigid-Flex PCB
Polyimide flex laminated into rigid FR-4 in one press cycle, to 16 layers.

High-Speed PCB
Impedance held to ±5%, back-drilled vias, low-loss laminates.

Rogers PCB
4003C, 4350B and 5880 laminates, verified to 28 GHz on coupon.

Ceramic PCB
Al₂O₃ at ~24 W/m·K and AlN at ~170 W/m·K for power and RF.

Heavy Copper PCB
4–6 oz standard, 12 oz on inquiry, with copper-filled thermal vias.

Metal Core PCB
Aluminium or copper base, 1–3 W/m·K dielectric, 8–12 W/m·K ceramic-filled.
Every board type is built to IPC Class 2 standard, Class 3 on request — see the full matrix for the limits that apply across the plant.
Eight stages, whether the board is four layers or thirty-two.
Imaging
Laser direct imaging on inner layers, with line width checked against the stack-up.
Inner-layer AOI
Opens, shorts and dimension errors caught before lamination locks them in.
Lamination
Press curve set per prepreg combination; registration checked after every cycle.
Drilling
Mechanical from 0.15 mm, laser from 0.1 mm, qualified on your laminate.
Plating
Panel plating and via fill controlled to the aspect ratio the design needs.
Surface finish
ENIG, HASL-LF, OSP, immersion silver, immersion tin or hard gold.
Electrical test
100% — flying probe on prototypes, fixture on volume, lots held if outside tolerance.
Final release
Documentation, CoC and IPC class stated per order before the carton closes.
Five laminate families, one finish decision.
Not sure which of the eight fits your design?
Send the files — a CAM engineer answers with the board type and the constraint, not a form.
The same eight types, in the products they end up inside.
Industrial Control
Motor drives, PLCs and automation controllers on 4 to 10 layer builds.
Networking and HPC
8 and 16 layer high-speed boards with back-drilled vias.
Power Electronics
4 oz and heavier copper for EV and motor control.
RF and Microwave
PTFE and ceramic substrates verified to 28 GHz.
Questions that come before the quote.
How many board types do you actually build?
Eight as standard production: multilayer, HDI, rigid-flex, high-speed, Rogers, ceramic, heavy copper and metal core. Anything outside that list is quoted as an inquiry rather than accepted as routine.
Which limits apply across all eight?
Layer count, panel size and electrical test are common to the plant: 2–32 layers, 600 × 900 mm panels, 100% electrical test. Trace width, copper weight and finish change with the board type.
Can fabrication and assembly be quoted together?
Yes. One quotation can cover both, and the quote form lets you ask for fabrication only, assembly only, or both.
What files do you need to start?
Gerber (RS-274X) or ODB++ with drill data, plus the stack-up if impedance is specified. A BOM is only needed when assembly is part of the order.
How fast is a quotation?
Quote in 24 hours for most orders. If the design needs a stack-up review first, the engineering query comes back inside the same window.
Have a board that does not fit the eight?
That is usually the interesting one. Quote in 24 hours.