Home/PCB Manufacturing
PCB Manufacturing

PCB Manufacturing Services

Eight board types under one process envelope — 2 to 32 layers, 0.075 mm trace and space, 12 oz copper, and a CAM review that comes back inside 24 hours.

PCB manufacturing floor at the HSX CIRCUIT plant

Overview

One envelope, eight board types.

PCB manufacturing covers a wide spread of work. A four-layer control board and a sixteen-layer rigid-flex assembly share a plating line but almost none of their stack-up decisions, and the process that suits one will ruin the other. This page is the map: what we build, how the eight board types differ, and which limits hold across all of them.

Most manufacturers list every board type they can attempt. We separate the eight that run as standard production from the work that needs an engineering query first, so a quote does not become the moment you discover a limit. That separation is the whole point of the list below.

32layers standard
0.075mm trace / space
12 ozcopper on inquiry
600×900mm max panel
8,000 m²plant floor
40+countries served

Process Flow

Eight stages, whether the board is four layers or thirty-two.

01

Imaging
Laser direct imaging on inner layers, with line width checked against the stack-up.

02

Inner-layer AOI
Opens, shorts and dimension errors caught before lamination locks them in.

03

Lamination
Press curve set per prepreg combination; registration checked after every cycle.

04

Drilling
Mechanical from 0.15 mm, laser from 0.1 mm, qualified on your laminate.

05

Plating
Panel plating and via fill controlled to the aspect ratio the design needs.

06

Surface finish
ENIG, HASL-LF, OSP, immersion silver, immersion tin or hard gold.

07

Electrical test
100% — flying probe on prototypes, fixture on volume, lots held if outside tolerance.

08

Final release
Documentation, CoC and IPC class stated per order before the carton closes.

Materials and Finish

Five laminate families, one finish decision.

Standard FR-4Tg 130–150°C · default below 3 GHz
High-Tg FR-4Tg 170–180°C · repeated reflow
Low-loss and RogersMEGTRON class · 4003C / 4350B / 5880
Ceramic and metal coreAl₂O₃ · AlN · aluminium or copper base

ENIG (default) · HASL-LF · OSP · Immersion Silver · Immersion Tin · Hard Gold (on request)

Not sure which of the eight fits your design?

Send the files — a CAM engineer answers with the board type and the constraint, not a form.

Get a Quote
WhatsApp

Where They Go

The same eight types, in the products they end up inside.

10-layer industrial control board

Industrial Control

Motor drives, PLCs and automation controllers on 4 to 10 layer builds.

8-layer back-drilled networking board

Networking and HPC

8 and 16 layer high-speed boards with back-drilled vias.

4 oz heavy copper powertrain board

Power Electronics

4 oz and heavier copper for EV and motor control.

28 GHz front-end board on Rogers laminate

RF and Microwave

PTFE and ceramic substrates verified to 28 GHz.

FAQ

Questions that come before the quote.

How many board types do you actually build?

Eight as standard production: multilayer, HDI, rigid-flex, high-speed, Rogers, ceramic, heavy copper and metal core. Anything outside that list is quoted as an inquiry rather than accepted as routine.

Which limits apply across all eight?

Layer count, panel size and electrical test are common to the plant: 2–32 layers, 600 × 900 mm panels, 100% electrical test. Trace width, copper weight and finish change with the board type.

Can fabrication and assembly be quoted together?

Yes. One quotation can cover both, and the quote form lets you ask for fabrication only, assembly only, or both.

What files do you need to start?

Gerber (RS-274X) or ODB++ with drill data, plus the stack-up if impedance is specified. A BOM is only needed when assembly is part of the order.

How fast is a quotation?

Quote in 24 hours for most orders. If the design needs a stack-up review first, the engineering query comes back inside the same window.

Have a board that does not fit the eight?

That is usually the interesting one. Quote in 24 hours.

Get a Quote