Home/Get a Quote
Request a Quote

Get a PCB Quote

Send what you have — Gerbers, a BOM, or a description good enough to start from. A CAM engineer reads it and answers with price, lead time and any DFM note in the same reply, within 24 hours.

    [html]
    The project
    [/html] [html]
    Rough is fine. If a detail is missing we will ask one question rather than guess twice.
    [/html] [html]
    [/html] [html]
    Gerber or ODB++, BOM, fabrication drawing, STEP model. Up to 10 files, 20 MB each.
    Timing
    [/html] [html]
    Whatever you select, the date is confirmed in the quote itself — we do not promise a delivery window before the files have been reviewed.
    Where to reply
    [/html] [html]
    [/html] [html]
    [/html] [html]
    [/html] [html]
    Email or phone — one of the two is enough. We just need a way to reach you.
    [/html] [html]
    [/html] [html]
    [/html] [html]
    [/html] [html] Goes to a CAM engineer, not a sales queue. Quote in 24 hours.
    [/html]

    FAQ

    Before you send the files.

    What do you need in order to quote?

    For bare PCB, Gerbers or ODB++ plus a fabrication drawing if you have one. For assembly, add a BOM with manufacturer part numbers and a pick-and-place file. If the design is still open, a description of the stack-up and the quantity is enough to start a conversation.

    How fast is the quote actually?

    Within 24 hours for a complete submission. A board with unusual requirements — sequential lamination, mixed laminates, tight impedance — sometimes needs one question answered first, and we ask it rather than quoting on an assumption.

    Will you sign an NDA?

    Yes. Send yours with the files, or ask for ours. Design data is kept to the project team in either case; the NDA makes that a contractual obligation rather than a promise.

    Can you quote from a BOM without Gerbers?

    For assembly-only work, yes — a BOM with MPNs and quantities gives us enough to price sourcing and placement. For bare board we need the layout, because the price depends on layer count, panel utilisation and drill count rather than on the parts list.

    What if my design sits outside your published limits?

    Say so in the description. Some limits open on inquiry — 50+ layers, 20:1 aspect ratio, 12 oz copper — and others we decline rather than attempt badly. Either way you get an answer, not silence. Every build we quote runs to IPC Class 2 standard, Class 3 on request, and the class is named on the certificate.