Backdrilling: Stub Length and Depth Control | HSX CIRCUIT
A residual stub notches the channel at 36 GHz per millimetre on FR-4, so drill depth is a channel-budget decision before it is a process one.
A residual stub notches the channel at 36 GHz per millimetre on FR-4, so drill depth is a channel-budget decision before it is a process one.
At 3 oz the etchant travels sideways through 105 µm of copper, so the minimum space opens to 0.20 mm and the trace section becomes a trapezoid.
Two resin systems through one press cycle, a 190 °C compromise profile, and why desmear behaves differently on each plastic.
The dielectric sets the thermal limit, not the aluminium: about 0.050 °C/W at 100 µm and 2 W/m·K under a 10 cm² source.
Three configurations, five cost drivers, and the interconnect count that decides whether the rigid premium comes back.
Alumina at 20–24 W/m·K and AlN at 170 against 0.2–0.3 for FR-4, plus the crossover arithmetic that decides which one ships.
What each BGA pitch band demands in via type, line width and stack-up, from 1.0 mm down to 0.35 mm.
Four tolerances, four sensitivities, and why the root-sum-square lands at 7.1% while the worst case reaches 12%.
Six finishes on flatness, shelf life and cost, and the two questions that remove four of them immediately.